OMG AUTOFARD 600C Automatic Shrink Wrapping Machine

OMG AUTOFARD 600 c Automatic shrink wrapping machine for books Quality shrink and wrapping depends on the presentation of the work to be wrapped; to obtain a good result, the introduction of the packet must be compact and square, the same applies if the manual introduction is not carried out with the maximum precision. It has always been difficult to obtain good results with saddle stitched products, due to their rounded spine and light weight paper. Technical Advantages Products can be fed at 90° both from the left or right. Once the stack reaches the plate, an electronic detector starts the pusher taking the packet to the welding area (OMG Patent). Problems with dog-ears and skewing of the stack, caused by pushing against the film, are solved by a sensor which prevents the stack touching the film. Stopper device stops the packet and holds it during the wrapping, in pneumatic cycle (OMG Patent) (mod. 500) (avoids the pile pushing against the film and stops it). Device for the automatic double stop of the packet and hold during the wrapping, in pneumatic cycle (OMG Patent) (mod. 600) (avoids the pile pushing against the film and stops it). Thermal welding bar with adjustable welding time and vertical up/down movement. SHRINK TUNNEL: Perforated teflon conveyor belt - Adjustable rollers to obtain a compact packet at the mini tunnel delivery - Forced air circulation from the side, top and bottom - Electronic temperature and ventilation adjustment – Electronic conveyor speed adjustment - Mini tunnel with cooling fan after the shrink tunnel Technical Features AUTOFARD 600 Max. speed: 16-18 packets/min Max. packet height : 300mm Max. packet : 500mm x 400mm Max. film roll width : 600mm Net weight – mod. 600: 740 kg Net weight – mod. 600-C: 810 kg