Foot pedal model
This machine is especially designed to drill two holes at time. The bedplate is pressed steel. The main bead unit is in cast aluminium. The drilling movement is manual by the use of a handle which is acting on a rack and gear with parts running on machined guides. The drilling heads are adjustable in order to have the drills at the same level. A tooth belt and a drive motor assist the drive of the drilling heads.
The VENUS is equipped with a tabulator for the execution of multiple hole drilling and with a system for waste collection. The VENUS may be converted to the VENUS 2 by adding a stand with a foot pedal. The stand is supplied dismantled and is easily reassembled.
It is possible to equip every VENUS model with a sliding table. In this case the machine codes become the following: 220/TM, 225/TM, 230/TM, 235/TM.
WORKING TABLE SIZE 65 x 35 cm. - 20' 9/16 x 14'
MOTOR POWER HP 0.75
POWER SUPPLY 220 V - 380 V 3
DRILLING DEPTH: 80 mm. - 3' ½
MINIMUM DISTANCE between holes 45 mm. - 1' ¾
MAXIMUM DISTANCE between holes 115 mm. - 4' 5/8
DRILLING MAXIMUM THICKNESS 50 mm.
DRILLING CAPACITY Diam. 3 - 14 mm.
PACKING SIZES 81 x 77 x 87 cm.
NET WEIGHT 95 Kg.
GROSS WEIGHT 125 Kg.