The Duplo DFC-10 friction collator is a bench-top or cabinet mounted friction fed collating system which can built into a system with up to 20 stations adding another unit.
The three-wheel feed system provides reliable feeding of a wide range of material, including certain coated stocks.
A Duplo collator and bookletmaker is quite simply the intelligent choice for your print business.
Whatever your requirements, Duplo offer a wide range of equipment and we at Print and Finish will do our very best to find the right machine for you.
Duplo DFC-10 Collator
Collating Stations - 10
Feed System - 3 wheel friction feed
Capacity Per Station - 28mm (260mm sheets @ 80gsm)
Sheet Size Min - 140x140mm
Sheet Size Max - 320x450mm
Paper Weight - 50-130gsm
Speed (sets/hr) - 3900 sets/hour
Counters - Total/batch
Duplo DBM-120 Automatic Bookletmaker
- Booklet capacity of up to 20 sheets (100 pages) of 20-lb. stock.
- Block capacity of up to 30 sheets of 20-lb stock.
- Production speeds of up to 1800 booklets per hour can be achieved.
- Programmable with 10 pre-set & three custom sizes
- Corner, Side or Regular Booklet Stapling
- Can be used used without staple head to fold up to 20 sheets in half
- Connects to the Duplo DSF-2000 Set Feeder & DBM-120T Automatic Trimmer.
A4 Sheet Speed Max 120 Sheets/Min
A4 Booklet Production Max 40 Books/Min
A3 Booklet Production Max 30 Books/Min
Typical Hourly Production
5 Sheet A4 5800 sheets (= 194 ppm)
5 Sheet A3 4500 sheets (= 300 ppm)
Programmes 10 pre-set sizes / 3 custom sizes
Sheet Sizes(Min) 279mm x 210mm
Sheet Sizes(Max) 457mm x 320mm
Booklet Sizes (Min) length 140mm (before trim) x 210mm
Booklet Sizes (Max) length 229 (before trim) x width320mm
Capacity (80gsm) 20 sheets (with grain)
Stitch/Staple Type 2 x Staple (from 2 x 5000 staple cartridge)